 |
 |
| Here's the shop hoist.
Can't pull an engine without one.... not easily anyway. |
Gotta have an engine
stand... cleaning, painting, buildup... Would be a nightmare
without it. |
 |
 |
| I don't have a big
shop/garage, so I chose this collapsible version of the hoist.
Pretty small footprint. |
The stand folds up
nicely too when not in use. |
| Tons more
tools now specifically for this project... metric and
Standard Tap and Die sets, impact wrench and socket set, HVLP
sprayer, Miller MIG welding unit... and lots of other little
things... Still need a good set of inside/outside mics, and
an indexing kit for the dial indicators... |
|
